Washing machine noise? specialists treating noise

Recently many users reflect, home washing machine after a summer of "leisurely life" after the recent sudden noise increases, particularly heavy in washing and washing clothes drying, the noise was unbearable.

Today I asked several experts in the field of household appliances, for the u.s. branch of the few to control the noise at home in great washing machine.

Why noise washing machine

Putting aside the product itself, design issues, quality problems not seen, washing machines producing noise are the following reasons:

1. washing machine installation uneven;

2. the motor bearings or badly worn drive shaft with bearings; or fragmentation

3. turn cylinder belt too tight;

4. micro deformation and laundry pail bottom friction;

5. dewatering bucket touch carton;

6. drive shaft sealing ring too tight on;

7. automatic set of drum washing machine balance hanger out of balance, etc.

Washing machine noise management measures — the "local conditions in accordance with the circumstances."

1, the laundry, the fuselage "bang" sound.

The fault is laundry pail and shell have collision between or washing machine placed ground unevenness or four foot and keep good contact with the ground. Then you need to place the focus adjustment, washing machine, or in a four floor mat on the pad.

2, the laundry, micro rotational friction "giggles".

Maintenance, you can drop into the water, do not put the clothing to be checked. At this point if the micro rotation is still "giggles" grating sound, is due to the micro rotates and laundry pail of bottom friction, as in clothing, the sound will be greater. The cause of the failure may be the micro screws loose, you can now remove the micro, then the bottom of the shaft with the appropriate thickness of the washers mats to enhance micro gap with the barrel. Eliminate the impact or friction. If micro touch cleaning laundry pail in the outer ring, you should remove the micro, trimmed and then loaded again.

3, motor rotation, rotation belt "crackling" sound.

The failure is due to the transmission belt relaxation. Overhaul of the motor base of fastening screw unscrew the motor direction away from the wave wheel rotation, so that the transmission belt tightening, motor fastening screws tightened.